仿真模型评价例句

来源:百度文库 编辑:神马文学网 时间:2024/04/27 23:26:31
1.ITS impacts evaluation is a critical part of ITS deployment Compared with field tests, simulation models show prominent advantages in this area However, most of existing simulation models are unfit for this task So nearly one hundred important models in the world are fully reviewed in our research The sound models which may be suitable for ITS impacts evaluation are gathered and assessed Finally, the prospects and aspects that need improving are also indicated. ITS影响评价是ITS应用中一个关键的组成部分 ,仿真模型在ITS影响评价中显示了突出的优点。 然而大多数已有仿真模型并不适用于ITS影响评价 ,本研究对目前世界上近百个重要仿真模型进行充分的调研 ,筛选出比较适合进行ITS影响评价的仿真模型 ,并对其性能进行总体评价。2.Since most of current network simulators are based on discrete event driven model and are built on the architecture of TCP/IP protocol stacks,design and implementation of the simulation model of physical layer protocol are the prerequisites for estimating the performance of upper layer pro- tocols. 由于现在的网络仿真器大都基于离散事件驱动模型和TCP/IP协议栈体系结构,所以物理层协议仿真模型的建立成为评价上层协议性能的前提。3.For purpose of optimizing the performance of an adjustable linear oil damper, this paper establishes the generalized optimization mathematical model for its fluid system by use of a self developed platform, then analyses and evaluates the optimization results by means of MATLAB dynamic simulation package Prototype development and test results show that the mathematical models and dynamic simulation are accurate, the developed CAD system is efficient and substantial for engineering applications 为了优化可调式线性油压减振器的性能 ,在自行研制的广义优化设计支持平台上对其线性阻尼系统进行广义优化建模与设计 ,并基于MATLAB开发了动态仿真软件包 ,对该广义优化设计结果进行分析与评价 样机开发与试验研究结果表明 :文中建立的广义优化设计数学模型和动态仿真模型是准确的 ,研制的计算机辅助优化设计系统高效、实用4.The results of the simulation indicate that the model with ADAMS/Car could evaluate and forecast the dynamics of the model.仿真结果表明,应用ADAMS/Car所建立的模型能较全面的评价和预测动力学性能。5.According to the evaluation system, an optimization model is established to avoid the phenomena that evaluation systems are apart from those models of choices of supply chain partners. Finally, simulation experiments by Genetic Algorithm and MATLAB are made to show the correctness and validity of the model. 最后,针对目前供应链合作伙伴的评价体系与其合作伙伴的选择模型相脱离的现象,结合本文的评价体系,建立了供应链合作伙伴的优化选择模型,使用遗传算法并以MATLAB为工具,对该模型及其求解算法进行了仿真试验,说明了该模型的正确性和有效性。 6.Secondly, a novel simulation and evaluation method based on the modulation transfer function (MTF) is proposed in this paper. The corresponding mathematic model is established. Based on the simulation curves, the factors that impact the interference effects are analyzed and compared to those of the extinction model. 第二,提出了基于调制传递函数的烟幕干扰效果仿真及评价方法,建立了相应的数学模型,根据仿真曲线分析影响干扰效果的因素,并与消光模型进行比较讨论,然后给出了基于此模型的仿真图像;7.Based on random dispatching algorithm for multiprocessor system and simulation principle for the queuing system, a model of system simulation based on FCFS queue dispatching for the multiprocessor system is presented in this paper, and the corresponding simulation software is developed,they can be utilized to predict performance parameters of the multiprocessor system.根据多处理机的随机模型调度算法和排队系统的仿真原理 ,提出了基于FCFS的多处理机的调度评价模型 ,并开发了仿真软件 ,用于预测多处理机方式下的系统性能参数 。 8.The paper establishes a comprehensive SC performance evaluation model based on network DEA,discusses the evaluating process through a simulation case and compares traditional DEA model with network DEA.首先在传统DEA模型的基础上构建一个基于网络DEA的综合性的供应链绩效评价模型。 接着通过一个仿真的案例来探讨企业供应链绩效的评价过程,比较了传统DEA模型和网络DEA模型,展示了网络DEA的优越性,使管理者能够更加深入了解企业的无效率过程。 9.The C3I models of photoelectric interferential system can be well and truly evaluated by simulation of the executable models of CPN. 通过对可执行模型CPN的仿真可对光电干扰武器系统C3I进行完整准确的评价。10.Considering different traffics characteristics and requirements, allocating bandwidth resources reasonably and efficiently, modeling multimedia networks accurately and evaluating the QoS parameters objectively, these problems have been solved in this thesis. 结合未来多种业务的不同特性和要求,合理高效地使用有限的带宽资源,同时保证各类业务不同级别的QoS,较精确地建立多媒体网络模型并进行仿真试验,客观有效地评价QoS参数,是本文主要解决的问题。