Ksh Scripting

Principle of Script
Variables
Branching
Looping
Commandline Arguments
Comparisons
Variable Manipulations
Ksh Regular Expressions
Functions
Data Redirection
Pipes
Coprocesses
Read Input from User and from Files
Special Variables
Action on Success or Failure of a Command
Trivial Calculations
Numerical Calculations using "bc"
"grep"
"sed"
"awk"
"perl"

Principle of Script

Defining the Shell Type

To make a ksh script (which is a ksh program) crate a new file with a starting line like:
#!/usr/bin/ksh
It is important that the path to the ksh is propper and that the line doesn not have more than 32 characters. The shell from which you are starting the script will find this line and and hand the whole script over to to ksh. Without this line the script would be interpreted by the same typ of shell as the one, from which it was started. But since the syntax is different for all shells, it is necessary to define the shell with that line.

Four Types of Lines

A script has four types of lines: The shell defining line at the top, empty lines, commentary lines starting with a # and command lines. See the following top of a script as an example for these types of lines:

#!/usr/bin/ksh

# Commentary......

file=/path/file
if [[ $file = $1 ]];then
   command
fi

Start and End of Script

The script starts at the first line and ends either when it encounters an "exit" or the last line. All "#" lines are ignored.

Start and End of Command

A command starts with the first word on a line or if it's the second command on a line with the first word after a";'.
A command ends either at the end of the line or whith a ";". So one can put several commands onto one line:

print -n "Name: "; read name; print ""

One can continue commands over more than one line with a "\" immediately followed by a newline sign which is made be the return key:

grep filename | sort -u | awk '{print $4}' | \
uniq -c >> /longpath/file

Name and Permissions of Script File

The script mus not have a name which is identical to a unix command: So the script must NOT be called "test"!
After saveing the file give it the execute permissions with: chmod 700 filename.

Filling in

When filling into a variable then one uses just it's name: state="US" and no blanks. There is no difference between strings and numbers: price=50.

Using

When using a variable one needs to put a $ sign in front of it: print $state $price.

Arrays

Set and use an array like:

#!/usr/bin/ksh

array[1]="hello"
array[2]="world"
array[3]="camel"
print ${array[*]}
print ${array[1]}
print ${#array[*]}

# ./array.sh
hello world camel
hello
3
Declaration

There are happily no declarations of variables needed in ksh. One cannot have decimals only integers.

if then fi

if [[ $value -eq 7 ]];then
   print "$value is 7"
fi

or:

if [[ $value -eq 7 ]]
then
   print "$value is 7"
fi

or:

if [[ $value -eq 7 ]];then print "$value is 7";fi

if then else fi

if [[ $name = "John" ]];then
   print "Your welcome, ${name}."
else
   print "Good bye, ${name}!"
fi

if then elif then else fi

if [[ $name = "John" ]];then
   print "Your welcome, ${name}."
elif [[ $name = "Hanna" ]];then
   print "Hello, ${name}, who are you?"
else
   print "Good bye, ${name}!"
fi

case esac

case $var in
   john|fred) print $invitation;;
   martin)    print $declination;;
   *)         print "Wrong name...";;
esac

while do done

while [[ $count -gt 0 ]];do
   print "\$count is $count"
   (( count -= 1 ))
done

until do done

until [[ $answer = "yes" ]];do
   print -n "Please enter \"yes\": "
   read answer
   print ""
done

for var in list do done

for foo in $(ls);do
   if [[ -d $foo ]];then
      print "$foo is a directory"
   else
      print "$foo is not a directory"
   fi
done

continue...break

One can skip the rest of a loop and directly go to the next iteration with: "continue".

while read line
do
   if [[ $line = *.gz ]];then
      continue
   else
      print $line
   fi
done

One can also prematurely leave a loop with: "break".

while read line;do
   if [[ $line = *!(.c) ]];then
      break
   else
      print $line
   fi
done

(Officially they are called "positional parameters")

The number of command line arguments is stored in $# so one can check
for arguments with:

if [[ $# -eq 0 ]];then
   print "No Arguments"
   exit
fi

The single Arguments are stored in $1, ....$n and all are in $* as one string. The arguments cannot
directly be modified but one can reset the hole commandline for another part of the program.
If we need a first argument $first for the rest of the program we do:

if [[ $1 != $first ]];then
   set $first $*
fi

One can iterate over the command line arguments with the help of the shift command. Shift indirectly removes the first argument.

until [[ $# -qe 0 ]];do
   # commands ....
   shift
done

One can also iterate with the for loop, the default with for is $*:

for arg;do
   print $arg
done

The program name is stored in $0 but it contains the path also!

To compare strings one uses "=" for equal and "!=" for not equal.
To compare numbers one uses "-eq" for equal "-ne" for not equal as well as "-gt" for greater than
and "-lt" for less than.

if [[ $name = "John" ]];then
   # commands....
fi
if [[ $size -eq 1000 ]];then
   # commands....
fi

With "&&" for "AND" and "||" for "OR" one can combine statements:

if [[ $price -lt 1000 || $name = "Hanna" ]];then
   # commands....
fi
if [[ $name = "Fred" && $city = "Denver" ]];then
   # commands....
fi

Removing something from a variable

Variables that contain a path can very easily be stripped of it: ${name##*/} gives you just the filename.
Or if one wants the path: ${name%/*}. % takes it away from the left and # from the right.
%% and ## take the longest possibility while % and # just take the shortest one.

例如：

#!/usr/bin/ksh

print '${0#*/}='${0#*/}
print '${0##*/}='${0##*/}
print '${0%/*}='${0%/*}
print '${0%%/*}='${0%%/*}

# lxs/shellscript/strip.sh
${0#*/}=shellscript/strip.sh
${0##*/}=strip.sh
${0%/*}=lxs/shellscript
${0%%/*}=lxs

Replacing a variable if it does not yet exits

If we wanted $foo or if not set 4 then: ${foo:-4} but it still remains unset. To change that we use:
${foo:=4}

Exiting and stating something if variable is not set

This is very important if our program relays on a certain vaiable: ${foo:?"foo not set!"}

例如:此时foo没有赋值；

#!/usr/bin/ksh

#foo="camel"
print ${foo:?"foo not set"}
print "hello world"

# ./tt.sh
./tt.sh[4]: foo: foo not set

下面的例子将foo赋值，则hello world被输出；

#!/usr/bin/ksh

foo="camel"
print ${foo:?"foo not set"}
print "hello world"

# ./tt.sh
camel
hello world

Just check for the variable

${foo:+1} gives one if $foo is set, otherwise nothing.

Ksh has it's own regular expressions.
Use an * for any string. So to get all the files ending it .c use *.c.
A single character is represented with a ?. So all the files starting with any sign followed bye 44.f can be fetched by: ?44.f.

Especially in ksh there are quantifiers for whole patterns:

?(pattern) matches zero or one times the pattern.
*(pattern) matches any time the pattern.
+(pattern) matches one or more time the pattern.
@(pattern) matches one time the pattern.
!(pattern) matches string without the pattern.

So one can question a string in a variable like: if [[ $var = fo@(?4*67).c ]];then ...

Description

A function (= procedure) must be defined before it is called, because ksh is interpreted at run time.
It knows all the variables from the calling shell except the commandline arguments. But has it's
own command line arguments so that one can call it with different values from different places in
the script. It has an exit status but cannot return a value like a c funcition can.

Making a Function

One can make one in either of the following two ways:

function foo {
   # commands...
}

foo(){
   # commands...
}

Calling the Function

To call it just put it's name in the script: foo. To give it arguments do: foo arg1 arg2 ...
The arguments are there in the form of $1...$n and $* for all at once like in the main code.
And the main $1 is not influenced bye the $1 of a particular function.

Return

The return statement exits the function imediately with the specified return value as an exit status.

例如：

#!/usr/bin/ksh

print $1
function foo {
print $1
return 100
}

foo "hello world"
if [[ $? -eq 100 ]]; then
        print "foo is successful"
fi
# ./fnc.sh camel
camel
hello world
foo is successful

General

Data redirection is done with the follwoing signs: "> >> < <<". Every program has at least a

standardinput, standardoutput and standarderroroutput. All of these can be redirected.

Command Output to File

For writing into a new file or for overwriting a file do: command > file

For appending to a file do: command >> file

Standard Error Redirection

To redirect the error output of a command do: command 2> file

To discard the error alltogether do: command 2>/dev/null

To put the error to the same location as the normal output do: command 2>&1

File into Command

If a program needs a file for input over standard input do: command < file

Combine Input and Output Redirection

command < infile > outfile
command < infile > outfile 2>/dev/null

Commands into Program ( Here Document )

Every unix command can take it's commands from a text like listing with:

command <input1
input2
input3
EOF

From eof to eof all is feeded into the above mentioned command.

{ while read myline;do
   # process $myline
done } < filename

last | sort | {
while read myline;do
   # commands
done }