编码主程序main

整个main函数分解
1.int M,N,n,np,nb;                            //Rate control
p_dec = p_in = -1;                           //(int) P_in: originalYUV file handle
//(int) P_dec: decoded image file handle
p_stat = p_log = p_trace = NULL;//(FILE *)P_start: status file for the last encoding session
//(FILE *)P_log: SNR file
//(FILE *)P_trace: Trace file
frame_statistic_start = 1;               //flag to indicate whether frame statistic start
2.Configure (argc, argv);
//Parse the command line parameters and read the config files.
//all the parameters be put into input..and has been checked检查合理性..
3 Init_QMatrix();                           //Initialise Q matrix values.
//该函数：
//if(input->ScalingMatrixPresentFlag)
// content = GetConfigFileContent(input->QmatrixFile, 0);//将文本file内容取出到content内存
// if(content!='\0') ParseMatrix(content, strlen (content));//将INTRA4X4_LUMA、
//INTRA4X4_CHROMAU、INTRA4X4_CHROMAV、INTER4X4_LUMA、INTER4X4_CHROMAU、
//INTER4X4_CHROMAV、INTRA8X8_LUMA、INTER8X8_LUMA取出
// PatchMatrix();//Check Q Matrix values如果直接赋值是否可以省略??
// memset(UseDefaultScalingMatrix4x4Flag, 0, sizeof(short)*6);
// UseDefaultScalingMatrix8x8Flag[0]=UseDefaultScalingMatrix8x8Flag[1]=0;
4.AllocNalPayloadBuffer();   //Initializes NAL module (allocates NAL_Payload_buffer)
//该函数主要功能是分配大小是img_width * img_height * 4的空间to NAL_Payload_buffer
//*4防止溢出，函数先施放空间FreeNalPayloadBuffer()，再分配空间。
5.init_poc();                           //Initializes the POC structure with appropriate parameters.
6.GenerateParameterSets();
//generates a sequence and picture parameter set
//and stores these in global active_sps and active_pps
7.init_img();
//Initializes the Image structure with appropriate parameters.
8.frame_pic = malloc_picture();
if (input->PicInterlace != FRAME_CODING)
{
top_pic = malloc_picture();
bottom_pic = malloc_picture();
}
9.init_rdopt ();
if (input->PyramidCoding )
{
init_gop_structure();
if (input->PyramidCoding == 3)
{
interpret_gop_structure();
}
else
{
create_pyramid();
}
}
10.init_dpb(input);
init_out_buffer();
11.enc_picture = enc_frame_picture = enc_top_picture = enc_bottom_picture = NULL;
12.init_global_buffers();
13.create_context_memory ();
14.Init_Motion_Search_Module ();
15.information_init();
16.//Rate control
if(input->RCEnable)
rc_init_seq();
if(input->FMEnable)
DefineThreshold();
17.Bframe_ctr=0;                  // B pictures
18.tot_time=0;                      // time for total encoding session
19.#ifdef _ADAPT_LAST_GROUP_
if (input->last_frame > 0)
input->no_frames = 1 + (input->last_frame + input->jumpd) / (input->jumpd + 1);
initial_Bframes = input->successive_Bframe;
#endif
20.PatchInputNoFrames();
21.// Write sequence header (with parameter sets)
stats->bit_ctr_parametersets = 0;
stats->bit_slice = start_sequence();
stats->bit_ctr_parametersets += stats->bit_ctr_parametersets_n;
start_frame_no_in_this_IGOP = 0;
22.for (img->number=0; img->number < input->no_frames; img->number++)//main
{}
23.terminate_sequence();// terminate sequence
24.flush_dpb();
25.close(p_in);
if (-1!=p_dec) close(p_dec);
if (p_trace) fclose(p_trace);
26.Clear_Motion_Search_Module ();
27.RandomIntraUninit();
28.FmoUninit();
29.if (input->PyramidCoding) clear_gop_structure ();
30.clear_rdopt (); // free structure for rd-opt. mode decision
31.#ifdef _LEAKYBUCKET_
calc_buffer();
#endif
32.report(); // report everything
33.free_picture (frame_pic);
if (top_pic) free_picture (top_pic);
if (bottom_pic) free_picture (bottom_pic);
34.free_dpb();
35.free_collocated(Co_located);
36.uninit_out_buffer();
37.free_global_buffers();
38.free_img ();                           // free image mem
39.free_context_memory ();
40.FreeNalPayloadBuffer();
41.FreeParameterSets();
42.return 0;                               //encode JM73_FME version