如何查IP冲突

来源:百度文库 编辑:神马文学网 时间:2024/05/16 18:05:11
你可以打开控制面板-管理工具-事件查看器-系统 然后点右侧打x的选项。。。
或者nbtstat命令 -A 192.168.1.200

Displays protocol statistics and current TCP/IP connections using NBT                《——显示协议统计和当前TCP / IP连接使用NBT还原——》
(NetBIOS over TCP/IP).NBTSTAT [ [-a RemoteName] [-A IP address] [-c] [-n]

        [-r] [-R] [-RR] [-s] [-S] [interval] ]  -a   (adapter status) Lists the remote machine's name table given its name

  -A   (Adapter status) Lists the remote machine's name table given its  IP address.
     《——A(适配器状态)列出远程计算机的名称表由于其——》
                       
  -c   (cache)     Lists NBT's cache of remote [machine] names and their IP  addresses
  《——列出NBT还原的缓存远程[机]名字和他们的IP地址——》

  -n   (names)          Lists local NetBIOS names.  《——列出本地NetBIOS名称——》

  -r   (resolved)       Lists names resolved by broadcast and via WINS  《——解决了播放列表的名称和通过的WINS——》

  -R   (Reload)         Purges and reloads the remote cache name table  《—— 清洗和重新加载远程缓存名称表——》

  -S   (Sessions)       Lists sessions table with the destination IP addresses  《——会议列出与目的IP地址表——》

  -s   (sessions)       Lists sessions table converting destination IP  addresses to computer NETBIOS names.
 《——列出会话表转换目标IP以计算机的NetBIOS名称地址。——》

                       
  -RR  (ReleaseRefresh) Sends Name Release packets to WINS and then, starts Refr

esh  RemoteName   Remote host machine name.《——((ReleaseRefresh)发送到WINS名称释放包,然后,开始Refr

舍RemoteName远程主机名。ReleaseRefresh)发送到WINS名称释放包,然后,开始Refr

舍RemoteName远程主机名。——》

  IP address   Dotted decimal representation of the IP address. 《——IP地址的点分十进制表示的IP地址——》

  interval     Redisplays selected statistics, pausing interval seconds

               between each display. Press Ctrl+C to stop redisplaying

               statistics. 《——interval重新显示所选的统计,暂停interval秒每个显示之间。按Ctrl + C停止重新显示统计。 。——》