How to convert .flv (flash video) to .avi or .mpg
来源:百度文库 编辑:神马文学网 时间:2024/04/27 22:58:51
How to convert .flv (flash video) to .avi or .mpg
hitrec posted 2005 Feb 25 05:29
Some sites have flash video’s online that play in your browser, if you have the correct plugins.
Thanks to Veblin, I learned that these video’s are stored on your HD (most likely the Temp Internet Files), and that they (sometimes) have the .flv (FLash Video) extension.
The .flv files play fine in the latestVLC player (v 0.81) or a dedicated FLV player likehttp://www.martijndevisser.com/archives/000021.php
I wanted to try to convert to avi or mpg and could not find a guide on videohelp, so I did some research of my own.
This is A way, it worked for me, and I would like to share it with you (helping this fine board to help others).
I use the RivaFLVencoder;
http://www.rivavx.com/index.php?encoder&L=3
which is freeware and it’s based on theFFMPEG encoder (normally it is used to create .flv files from .avi or .mpg, but it can do the reverse too).
There is also FlixPro by Wildform, but that costs about $150.
Download, install and open Riva.
Klick the Browse button in the Input tab and locate the .flv file you want to convert.
Klick the Browse button in the Output tab to select the location to save your output.
The default outputname will have the extension .flv (after all it is an FLV encoder) but just click it and change the extension to .avi or .mpg
Then adjust the encoding parameters for both video and audio to your liking
Make sure you check the box Enable Audio or you’ll end up with a mute video.
It’s possible that the .flv contains an audiocodec that will not be transcoded. A solution for that is to play the original .flv and record the audio withAudacity (for instance) and to mux that recording with the .avi or .mpg you get from Riva.
Just experiment with the settings, but don’t expect miracles.
With the correct settings, you can now hit the Encode button
TheFFMPEG window will popup
When FFMPEG is done with the encoding, this window will close and (hopefully) you have an .avi or .mpg.
The .avi is compressed with FFMPEG’s divx codec, as far as I know.
Again, this is only a way of converting that I tried and it worked for me.
It might be possible to use only FFMPEG, but I’m not familiar with it’s commandline, so I’m gratefull for the GUI of Riva.
Someone out there might have a much better solution, but he/she did not post a guide.
Special credits and thanks to Veblin of the streaming forum for pointing out some things to me.
Regards,
Hitrec
hitrec posted 2005 Feb 25 05:29
Some sites have flash video’s online that play in your browser, if you have the correct plugins.
Thanks to Veblin, I learned that these video’s are stored on your HD (most likely the Temp Internet Files), and that they (sometimes) have the .flv (FLash Video) extension.
The .flv files play fine in the latestVLC player (v 0.81) or a dedicated FLV player likehttp://www.martijndevisser.com/archives/000021.php
I wanted to try to convert to avi or mpg and could not find a guide on videohelp, so I did some research of my own.
This is A way, it worked for me, and I would like to share it with you (helping this fine board to help others).
I use the RivaFLVencoder;
http://www.rivavx.com/index.php?encoder&L=3
which is freeware and it’s based on theFFMPEG encoder (normally it is used to create .flv files from .avi or .mpg, but it can do the reverse too).
There is also FlixPro by Wildform, but that costs about $150.
Download, install and open Riva.
Klick the Browse button in the Input tab and locate the .flv file you want to convert.
Klick the Browse button in the Output tab to select the location to save your output.
The default outputname will have the extension .flv (after all it is an FLV encoder) but just click it and change the extension to .avi or .mpg
Then adjust the encoding parameters for both video and audio to your liking
Make sure you check the box Enable Audio or you’ll end up with a mute video.
It’s possible that the .flv contains an audiocodec that will not be transcoded. A solution for that is to play the original .flv and record the audio withAudacity (for instance) and to mux that recording with the .avi or .mpg you get from Riva.
Just experiment with the settings, but don’t expect miracles.
With the correct settings, you can now hit the Encode button
TheFFMPEG window will popup
When FFMPEG is done with the encoding, this window will close and (hopefully) you have an .avi or .mpg.
The .avi is compressed with FFMPEG’s divx codec, as far as I know.
Again, this is only a way of converting that I tried and it worked for me.
It might be possible to use only FFMPEG, but I’m not familiar with it’s commandline, so I’m gratefull for the GUI of Riva.
Someone out there might have a much better solution, but he/she did not post a guide.
Special credits and thanks to Veblin of the streaming forum for pointing out some things to me.
Regards,
Hitrec
How to convert .flv (flash video) to .avi or .mpg
How To Convert or Rip Blu-ray DVD to HD AVI, HD WMV, HD MPEG, HD MOV Video format with BestHD Blu-ra
How to convert/rip Blu-ray dvd to avi format with Blu ray to AVI Converter?
How to convert Blu-ray disc to WMV?
How to Make Pizza Dough: 9 steps (with video)...
How to...
how to
How to identify a mobile at execution or installation time
How to Find or Validate an Email Address
How to Find or Validate an Email Address
win32 programmer directx video How to reset start time in renderer?
FLV Converter-Convert Videos between FLV and Other Popular Video Formats
PPT中插入avi、mpg、flv、swf及rm、rmvb等视频文件的方法
PPT中插入avi、mpg、flv、swf及rm、rmvb等视频文件
How to install Eeebuntu with a usb flash drive
How to praise
How to apply PKM
how to install moodle
How to switch careers
CSS How To...
How To Initiate Conversation
how to learn English
How to Sell America
How to stduy Chinese?