6 inch VMI Horizontal Dredge

Dredges and Dredging Equipment
  Hydraulic Dredges   Cargo Barges   Dredge Components
  Mechanical Dredges   Work & Crane Barges   Pipeline Components
  Hopper Dredges   Work Boats   Support Equipment

File 90806-DH

More Photos
6 inch VMI Horizontal Dredge
This 6 inch VMI Horizontal Dredge is a Model # MD-615 HC.
Located in The State of New Jersey, USA
Price for Dredge: USD $ 105,000
Technical Details Principal Dimensions and Characteristics
Length Over All: 11.43 m
38 feet
Height: (without A/C) 2.59 m
8 feet
Width: (Transport) 2.74 m 9 feet
Weight: (approx.) 10,400 kg
23,000 lbs
Draft: 558.8 mm 22 inches
Fuel capacity: 923 liters
244 gallons
Main Engine
Make/Model: Cummins / QSB 8.3
Power @ 2,200 RPM 194 kW 260  hp
Pump
Make/Model: Hi-chrome cast iron, centrifugal, recessed impeller
Impeller: 558.8 m 22 inches
Suction: 152.4 mm 6 inches
Discharge: 152.4 mm 6 inches
Capacity: (water @ 68 degrees F 5.75" (146 mm) sphere - Variable to 2,000 GPM (7,570 L/min) @ 140' (42.7 m) head @ 1,140 RPM
Cutter Assembly
Type: Horizontal with full-width, flow-through suction (Paddle and cutting teeth available)
Size: 9 feet wide x 21 inches diameter 2.74 m wide x 533.4 mm diameter
Speed: Variable 0-80 RPM (forward and reverse)
Torque: 56,000 lbs (6,328 N.m)
Operating Depth: Variable tp 15' (4.57 m) mximum
Pontoons (2)
Dimensions: ( 2) Two - 32" (812.8 mm) x 34" (863.6 mm) x 33' 6" (10.21 m)
Description:
10 gauge steel, integral bulkheads and stiffeners, formed for rigidity,
cora-foam filled
Propulsion
Type: Treble sheave hydraulic winch
Traverse speed: Variable 0-5 ft/min (0-15.2 m/min)
Cutting speed: 0-15 ft/min (0-4.57 m/min)
Hydraulic System
Pumps: Variable displacement, axial piston
Motors: Fixed displacement
Capacity: Total, 130 GPM (492.1 L/min) @ 2,220 RPM
Reservoir: 378.5 liters 100 gallons
Drive
Type: Hydraulic pump drive, direct from engine
Filters
Type: protected hydrostatic loop, high pressure suction & return
Relief Settings
Centrifugal Pump: 4,000 psi (276 bar)
Cutter Head: 3,000 psi (207 bar)
Accessories: 3,000 psi (207 bar)
Boom: 1,500 psi (103 bar)
Electrical System
Alternator: Output - 100 amp
Battery: Heavy Duty - 12 volt
Prime Finish
Lower Structure Shear Tar Epoxy Paint
Upper Structure Blue and White Epoxy paint
All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice.
Si usted prefiere hablar español, contacte por favor a Wilhelm von Mayer aqui. Für kontakt auf Deutsch, bitte melden Sie sich mit Herr Wilhelm von Mayerhier. List Your Equipment for Free.

DredgeBrokers © 2007
Dredge Brokers Design bythewritersforhire.com