linux 与ipv6

来源:百度文库 编辑:神马文学网 时间:2024/04/29 05:56:35
*默认网关设置:route -A inet6 add ::/0 gw xxxxxx (若搜索不到主机,查看是否有相关路由表需删除) 在windows下ipv6 rtu ::/0 6(接口) /xxxxxx 默认路由 在windows下add route xxxxxx/size 6 /xxxxx 默认网关 *添加路由:route -A inet6 add 网段或网址 g    *默认网关设置:route -A inet6 add  ::/0 gw  xxxxxx(若搜索不到主机,查看是否有相关路由表需删除)在windows下ipv6 rtu  ::/0  6(接口)   /xxxxxx   默认路由
在windows下add  route  xxxxxx/size  6  /xxxxx  默认网关*添加路由:route  -A inet6  add   网段或网址  gw   地址(对于linux系统作为路由器,不用配任何路由表,只要路由器接口地址与机器接口在同一网段)*地址配置:ifconfig eth0 inet6 add/del   xxxxxx  或者ip -6  addr  add  xxxxxx  dev  eth0*接口启用/关闭:ifconfig eth0 up/down(当配置地址不成功可以检查端口是否启用)*信息查看:ip -6 addr  showip -6 route show 或者ip -6  route show  dev  eth0* 开启转发:echo 1 > /proc/sys/net/ipv6/conf/all/forwarding————————————————————————————如果配置地址没有成功可以/etc/network/interfaces  restart/etc/init.d/networking restart如果配置地址不成功,也可以修改机器启动脚本/etc/rc.local,加入如下内容auto lo interface lo inet loopbackauto eth0 interface inet6 static 地址  network size/sbin/ifconfig  eth0  inet6 add 地址/size  exit如果配置转发不成功,可以修改配置文件/etc/sysctl.conf如下net.ipv6.conf.all.forwarding=1net.ipv6.conf.default.forwarding=1