Windows CE 4.x Emulator winxp&sp2问题,解决方法
来源:百度文库 编辑:神马文学网 时间:2024/05/15 17:57:30
You receive error messages when you install Windows CE 4.x Emulator on a computer that is running Windows XP Service Pack 2 and the computer has DEP hardware
View products that this article applies to.
Article ID : 891667
Last Review : May 20, 2005
Revision : 1.2
SYMPTOMS
You install Microsoft Windows CE 4.x Emulator on a computer that is running Microsoft Windows XP Service Pack 2 (SP2). The computer has Data Execution Prevention (DEP) hardware. You receive the following error message when you restart your computer:
Devices or applications disabled
‘Virtual PC/Windows CE Emulator‘ will cause Windows to become unstable. Windows has prevented these drivers from loading.
You may also receive the following error message when you try to start Windows CE 4.x Emulator:
Emulator for Windows CE
One or more files from the Emulator for Windows CE installation is missing. Please reinstall Emulator for Windows CE and try again.
CAUSE -- 原因
This problem occurs because Windows XP with SP2 does not allow the Virtual PC/Windows CE Emulator driver (VPCAppSv.sys) to load when hardware-based DEP is enabled. This is part of the Windows XP SP2 Driver Protection feature.
Note Physical Address Extension (PAE) mode must be enabled for DEP to work. Windows XP automatically enables PAE mode to support hardware-based DEP. You do not have to make an entry in the Boot.ini file to enable PAE mode.
RESOLUTION--解决方法
Important These steps may increase your security risk. These steps may also make your computer or your network more vulnerable to attack by malicious users or by malicious software such as viruses. We recommend the process that this article describes to enable programs to operate as they are designed to, or to implement specific program capabilities. Before you make these changes, we recommend that you evaluate the risks that are associated with implementing this process in your particular environment. If you choose to implement this process, take any appropriate additional steps to help protect your system. We recommend that you use this process only if you really require this process.
To resolve this problem and to run Window CE 4.x Emulator, disable hardware-based DEP on your computer that is running Windows XP SP2.
To do this, follow these steps:
1. Click Start,(开始), click Run,(运行) type sysdm.cpl, and then click OK. (确定)
2. In the System Properties (系统属性) dialog box, click the Advanced tab. (高级)
3. Under Start and Recovery,(启动和故障恢复), click Settings. (设置)
4. In the Startup and Recovery ,(启动和故障恢复), dialog box, click Edit.(编辑)
5. Disable PAE mode by removing the /pae option if it exists.
6. Remove the /noexecute option if it exists.
7. Add the /execute option.
8. On the File menu, click Save.
9. To exit Notepad, click Exit on the File menu.
10. To close System Properties, click OK two times.
11. Restart your computer.
View products that this article applies to.
Article ID : 891667
Last Review : May 20, 2005
Revision : 1.2
SYMPTOMS
You install Microsoft Windows CE 4.x Emulator on a computer that is running Microsoft Windows XP Service Pack 2 (SP2). The computer has Data Execution Prevention (DEP) hardware. You receive the following error message when you restart your computer:
Devices or applications disabled
‘Virtual PC/Windows CE Emulator‘ will cause Windows to become unstable. Windows has prevented these drivers from loading.
You may also receive the following error message when you try to start Windows CE 4.x Emulator:
Emulator for Windows CE
One or more files from the Emulator for Windows CE installation is missing. Please reinstall Emulator for Windows CE and try again.
CAUSE -- 原因
This problem occurs because Windows XP with SP2 does not allow the Virtual PC/Windows CE Emulator driver (VPCAppSv.sys) to load when hardware-based DEP is enabled. This is part of the Windows XP SP2 Driver Protection feature.
Note Physical Address Extension (PAE) mode must be enabled for DEP to work. Windows XP automatically enables PAE mode to support hardware-based DEP. You do not have to make an entry in the Boot.ini file to enable PAE mode.
RESOLUTION--解决方法
Important These steps may increase your security risk. These steps may also make your computer or your network more vulnerable to attack by malicious users or by malicious software such as viruses. We recommend the process that this article describes to enable programs to operate as they are designed to, or to implement specific program capabilities. Before you make these changes, we recommend that you evaluate the risks that are associated with implementing this process in your particular environment. If you choose to implement this process, take any appropriate additional steps to help protect your system. We recommend that you use this process only if you really require this process.
To resolve this problem and to run Window CE 4.x Emulator, disable hardware-based DEP on your computer that is running Windows XP SP2.
To do this, follow these steps:
1. Click Start,(开始), click Run,(运行) type sysdm.cpl, and then click OK. (确定)
2. In the System Properties (系统属性) dialog box, click the Advanced tab. (高级)
3. Under Start and Recovery,(启动和故障恢复), click Settings. (设置)
4. In the Startup and Recovery ,(启动和故障恢复), dialog box, click Edit.(编辑)
5. Disable PAE mode by removing the /pae option if it exists.
6. Remove the /noexecute option if it exists.
7. Add the /execute option.
8. On the File menu, click Save.
9. To exit Notepad, click Exit on the File menu.
10. To close System Properties, click OK two times.
11. Restart your computer.
Windows CE 4.x Emulator winxp&sp2问题,解决方法
解决Virtual pc/windows CE emulator警告问题
解决Virtual pc/windows CE emulator警告问题
winxp sp2的局域网互访问题快速解决之道
Windows CE应用软件
关于SQL Server 2000 在 WinXP SP2 下的一些问题_一直在学习_该长...
Windows CE的学习路线
Windows CE的学习路线
配置Windows CE下浏览器
硬盘安装Windows XP SP2
Windows XP打印共享四大问题及解决方法
Windows Mobile 6 SDK 中的 Cellular Emulator - 黎...
Windows CE开发常见问题解答(转载)
Windows CE平台上的数据库编程
小议Windows CE 的下浏览器配置
详细代码:windows CE手机拨号
Windows XP SP2系统设置技巧
Windows XP SP2系统设置技巧2
Windows XP SP2安装故障二则
常见WinXP启动故障及解决方法-
Windows桌面图标故障解决方法
在 Windows CE 下申请大容量物理内存
Windows CE Base Team Blog : Debug messages an...
Windows CE内核启动分析 - 移植 - 转载专用!!!