fghdhf
来源:百度文库 编辑:神马文学网 时间:2024/04/19 23:53:21
Requirements Test Scenario Test Case ID # TE Comments
Can be Automated with QTP Can be Automated with QTP + Extra Scripts Cannot be Automated
Manual Toning from Command-line
SR14348: The system shall allow the user to request to perform the following actions from the command-line.
SR14348.1: Tone one or more stations (User shall specify Station Ids).
SR14352: (Validate specified Station IDs): If the user requests to tone one or more stations, the system shall validate that the specified Station IDs are configured within the system.
SR14355: (Final Processing): The system shall perform the following actions based on the input specified by the user.
SR14355.1: (Tone one or more stations): If the user requests to tone one or more stations, the system shall perform the toning actions configured for each of the specified stations.
SR14355.5: (Notify Success/Failure): In response to the user抯 request for manual toning, the system shall return to the user, a message indicating the success/failure as the case may be. A message indicating the success is returned to user when the user specifies [one/more] station ID(s) which is(are) configured within the system to perform a tone transaction. WINGS_CAD_ST_MTFCL_ToneStationSuccess 2
SR14348: The system shall allow the user to request to perform the following actions from the command-line.
SR14348.1: Tone one or more stations (User shall specify Station Ids).
SR14352: (Validate specified Station IDs): If the user requests to tone one or more stations, the system shall validate that the specified Station IDs are configured within the system.
SR14355: (Final Processing): The system shall perform the following actions based on the input specified by the user.
SR14355.1: (Tone one or more stations): If the user requests to tone one or more stations, the system shall perform the toning actions configured for each of the specified stations.
SR14355.5: (Notify Success/Failure): In response to the user抯 request for manual toning, the system shall return to the user, a message indicating the success/failure as the case may be. A message indicating the failure is returned to user when the user specifies [one/more] station ID(s) which is(are) not configured within the system to perform a tone transaction. WINGS_CAD_ST_MTFCL_ToneStationFail 2
SR14348: The system shall allow the user to request to perform the following actions from the command-line.
SR14348.2: Tone one or more units (User shall specify Unit Ids)
SR14353: (Validate specified Unit IDs): If the user requests to tone one or more units, the system shall validate that the specified Unit IDs are valid within the system.
SR14355: (Final Processing): The system shall perform the following actions based on the input specified by the user.
SR14355.2: (Tone one or more units): If the user requests to tone one or more units, the system shall perform the toning actions configured for the station/bay of each of the specified units.
SR14355.5: (Notify Success/Failure): In response to the user抯 request for manual toning, the system shall return to the user, a message indicating the success/failure as the case may be. A message indicating the success is returned to user when the user specifies [one/more] Unit ID(s) which is(are) valid within the system to perform a tone transaction. WINGS_CAD_ST_MTFCL_ToneUnitSuccess 2
SR14348: The system shall allow the user to request to perform the following actions from the command-line.
SR14348.2: Tone one or more units (User shall specify Unit Ids)
SR14353: (Validate specified Unit IDs): If the user requests to tone one or more units, the system shall validate that the specified Unit IDs are valid within the system.
SR14355: (Final Processing): The system shall perform the following actions based on the input specified by the user.
SR14355.2: (Tone one or more units): If the user requests to tone one or more units, the system shall perform the toning actions configured for the station/bay of each of the specified units.
SR14355.5: (Notify Success/Failure): In response to the user抯 request for manual toning, the system shall return to the user, a message indicating the success/failure as the case may be. A message indicating the failure is returned to user when the user specifies [one/more] Unit ID(s) which is(are) not valid within the system to perform a tone transaction. WINGS_CAD_ST_MTFCL_ToneUnitFail 2
SR14348: The system shall allow the user to request to perform the following actions from the command-line.
SR14348.3: Execute one or more toning actions (User shall specify Toning Action Ids)
SR14354: (Validate specified Toning Action IDs): If the user requests to execute one or more toning actions, the system shall validate that the specified Toning Action IDs are configured within the system.
SR14355: (Final Processing): The system shall perform the following actions based on the input specified by the user
SR14355.4: (Execute one or more toning actions): If the user requests to execute one or more toning actions, the system shall execute the specified toning actions.
SR14355.5: (Notify Success/Failure): In response to the user抯 request for manual toning, the system shall return to the user, a message indicating the success/failure as the case may be. A message indicating the success is returned to user when the user specifies [one/more] Toning Action ID(s) which is(are) valid within the system to perform a tone transaction. WINGS_CAD_ST_MTFCL_ToneActionSuccess 2
SR14348: The system shall allow the user to request to perform the following actions from the command-line.
SR14348.3: Execute one or more toning actions (User shall specify Toning Action Ids)
SR14354: (Validate specified Toning Action IDs): If the user requests to execute one or more toning actions, the system shall validate that the specified Toning Action IDs are configured within the system.
SR14355: (Final Processing): The system shall perform the following actions based on the input specified by the user
SR14355.4: (Execute one or more toning actions): If the user requests to execute one or more toning actions, the system shall execute the specified toning actions.
SR14355.5: (Notify Success/Failure): In response to the user抯 request for manual toning, the system shall return to the user, a message indicating the success/failure as the case may be. A message indicating the failure is returned to user when the user specifies [one/more] Toning Action ID(s) which is(are) not valid within the system to perform a tone transaction. WINGS_CAD_ST_MTFCL_ToneActionFailure 2
SR14348: The system shall allow the user to request to perform the following actions from the command-line.
SR14348.1: Tone one or more stations (User shall specify Station Ids).
SR14348.2: Tone one or more units (User shall specify Unit Ids).
SR14355: (Final Processing): The system shall perform the following actions based on the input specified by the user.
SR14355.3: (No Toning Actions configured): If there are no toning actions configured for the specified stations/units, the system shall perform nothing and shall indicate to the user that the specified stations/units do not have any toning actions configured. The user is indicated that the specified [station/unit] do not have any toning actions configured when the user specifies no toning actions for the specified [station/unit]. WINGS_CAD_ST_MTFCL_NoToneAction 2 Two cases are enough. There are just two condition that the user specifies [station/unit].
SR ID Test Case ID Purpose Required Equipment Test Setup Execution Steps Expected Results Comments Owner Status Auto/Manual/Not Implemented Test Result Phase Tested Bug ID SR Partial SR Comments Iteration Automated with QTP Can be Automated with QTP
Can be Automated with QTP Can be Automated with QTP + Extra Scripts Cannot be Automated
Manual Toning from Command-line
SR14348: The system shall allow the user to request to perform the following actions from the command-line.
SR14348.1: Tone one or more stations (User shall specify Station Ids).
SR14352: (Validate specified Station IDs): If the user requests to tone one or more stations, the system shall validate that the specified Station IDs are configured within the system.
SR14355: (Final Processing): The system shall perform the following actions based on the input specified by the user.
SR14355.1: (Tone one or more stations): If the user requests to tone one or more stations, the system shall perform the toning actions configured for each of the specified stations.
SR14355.5: (Notify Success/Failure): In response to the user抯 request for manual toning, the system shall return to the user, a message indicating the success/failure as the case may be. A message indicating the success is returned to user when the user specifies [one/more] station ID(s) which is(are) configured within the system to perform a tone transaction. WINGS_CAD_ST_MTFCL_ToneStationSuccess 2
SR14348: The system shall allow the user to request to perform the following actions from the command-line.
SR14348.1: Tone one or more stations (User shall specify Station Ids).
SR14352: (Validate specified Station IDs): If the user requests to tone one or more stations, the system shall validate that the specified Station IDs are configured within the system.
SR14355: (Final Processing): The system shall perform the following actions based on the input specified by the user.
SR14355.1: (Tone one or more stations): If the user requests to tone one or more stations, the system shall perform the toning actions configured for each of the specified stations.
SR14355.5: (Notify Success/Failure): In response to the user抯 request for manual toning, the system shall return to the user, a message indicating the success/failure as the case may be. A message indicating the failure is returned to user when the user specifies [one/more] station ID(s) which is(are) not configured within the system to perform a tone transaction. WINGS_CAD_ST_MTFCL_ToneStationFail 2
SR14348: The system shall allow the user to request to perform the following actions from the command-line.
SR14348.2: Tone one or more units (User shall specify Unit Ids)
SR14353: (Validate specified Unit IDs): If the user requests to tone one or more units, the system shall validate that the specified Unit IDs are valid within the system.
SR14355: (Final Processing): The system shall perform the following actions based on the input specified by the user.
SR14355.2: (Tone one or more units): If the user requests to tone one or more units, the system shall perform the toning actions configured for the station/bay of each of the specified units.
SR14355.5: (Notify Success/Failure): In response to the user抯 request for manual toning, the system shall return to the user, a message indicating the success/failure as the case may be. A message indicating the success is returned to user when the user specifies [one/more] Unit ID(s) which is(are) valid within the system to perform a tone transaction. WINGS_CAD_ST_MTFCL_ToneUnitSuccess 2
SR14348: The system shall allow the user to request to perform the following actions from the command-line.
SR14348.2: Tone one or more units (User shall specify Unit Ids)
SR14353: (Validate specified Unit IDs): If the user requests to tone one or more units, the system shall validate that the specified Unit IDs are valid within the system.
SR14355: (Final Processing): The system shall perform the following actions based on the input specified by the user.
SR14355.2: (Tone one or more units): If the user requests to tone one or more units, the system shall perform the toning actions configured for the station/bay of each of the specified units.
SR14355.5: (Notify Success/Failure): In response to the user抯 request for manual toning, the system shall return to the user, a message indicating the success/failure as the case may be. A message indicating the failure is returned to user when the user specifies [one/more] Unit ID(s) which is(are) not valid within the system to perform a tone transaction. WINGS_CAD_ST_MTFCL_ToneUnitFail 2
SR14348: The system shall allow the user to request to perform the following actions from the command-line.
SR14348.3: Execute one or more toning actions (User shall specify Toning Action Ids)
SR14354: (Validate specified Toning Action IDs): If the user requests to execute one or more toning actions, the system shall validate that the specified Toning Action IDs are configured within the system.
SR14355: (Final Processing): The system shall perform the following actions based on the input specified by the user
SR14355.4: (Execute one or more toning actions): If the user requests to execute one or more toning actions, the system shall execute the specified toning actions.
SR14355.5: (Notify Success/Failure): In response to the user抯 request for manual toning, the system shall return to the user, a message indicating the success/failure as the case may be. A message indicating the success is returned to user when the user specifies [one/more] Toning Action ID(s) which is(are) valid within the system to perform a tone transaction. WINGS_CAD_ST_MTFCL_ToneActionSuccess 2
SR14348: The system shall allow the user to request to perform the following actions from the command-line.
SR14348.3: Execute one or more toning actions (User shall specify Toning Action Ids)
SR14354: (Validate specified Toning Action IDs): If the user requests to execute one or more toning actions, the system shall validate that the specified Toning Action IDs are configured within the system.
SR14355: (Final Processing): The system shall perform the following actions based on the input specified by the user
SR14355.4: (Execute one or more toning actions): If the user requests to execute one or more toning actions, the system shall execute the specified toning actions.
SR14355.5: (Notify Success/Failure): In response to the user抯 request for manual toning, the system shall return to the user, a message indicating the success/failure as the case may be. A message indicating the failure is returned to user when the user specifies [one/more] Toning Action ID(s) which is(are) not valid within the system to perform a tone transaction. WINGS_CAD_ST_MTFCL_ToneActionFailure 2
SR14348: The system shall allow the user to request to perform the following actions from the command-line.
SR14348.1: Tone one or more stations (User shall specify Station Ids).
SR14348.2: Tone one or more units (User shall specify Unit Ids).
SR14355: (Final Processing): The system shall perform the following actions based on the input specified by the user.
SR14355.3: (No Toning Actions configured): If there are no toning actions configured for the specified stations/units, the system shall perform nothing and shall indicate to the user that the specified stations/units do not have any toning actions configured. The user is indicated that the specified [station/unit] do not have any toning actions configured when the user specifies no toning actions for the specified [station/unit]. WINGS_CAD_ST_MTFCL_NoToneAction 2 Two cases are enough. There are just two condition that the user specifies [station/unit].
SR ID Test Case ID Purpose Required Equipment Test Setup Execution Steps Expected Results Comments Owner Status Auto/Manual/Not Implemented Test Result Phase Tested Bug ID SR Partial SR Comments Iteration Automated with QTP Can be Automated with QTP